Hitachi IJ UX Instruction Manual page 213

Ink jet printer for industrial marking
Hide thumbs Also See for IJ UX:
Table of Contents

Advertisement

(4) Data copy operation from other models
●Data created on KX, PX, PB, PXR, RX, RX2, PH or PH(op:10.4 type LCD) can be copied to UX.
Following operations 1 through 3 must be conducted prior to using other models' data on UX to store the
backup data of other models in the USB memory via a PC.
Note "PHC" shown below stands for Color LCD of PH(op:10.4 type LCD).
1. Create a "UXDAT" folder if it does not already exist in USB memory.
2. Create a new folder with the name of the printer's model name (KX, PX, PB, PXR,
PH or PHC) under the "UXDAT" folder created in 1. above.
In case of RX/RX2, create a new folder "RX".
3.
KX
PB
PX,
PXR
RX,
RX2
Prior operation
Create a new folder and change its name to [8-digits serial number] under
"KX" folder created in 2. above.
Create a "IJPDATA" folder under the folder saved as the [8-digits serial
number] and copy every backup data file to "IJP DATA" folder.
USB memory
UXDAT
KX
Copy the backup serial number folder which is created on PB and rename
it as [8-digits number] under the "PB" folder created in 2.
USB memory
UXDAT
PB
Copy the backup serial number folder which is created on PX or PXR
under the "PX" or "PXR" folder created in 2.
USB memory
UXDAT
PX
PXR
Copy the backup serial number folder which is created on RX or RX2
under the "RX" folder created in 2.
USB memory
UXDAT
RX
00000000
IJPDATA
00000001
00000002
00000003
00000004
●Backing up data to USB memory 7-33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents