4.7
Installing I/O modules
Introduction
The I/O modules are installed following the CPU/interface module. I/O modules form the
interface between the controller and the process. The controller detects the current process
state via the connected sensors and actuators, and triggers the corresponding reactions.
Requirements
The mounting rail is installed.
The CPU/interface module is installed.
In the module/CPU/interface module located to the left of the I/O module, a U-connector is
inserted on the back right.
Tools required
Screwdriver with 4.5 mm blade
Automation system
System Manual, 09/2016, A5E03461182-AD
Installation
4.7 Installing I/O modules
61