Siemens SIMATIC S7-1500 System Manual page 51
Automation system
Hide thumbs
Also See for SIMATIC S7-1500:
- System manual (523 pages) ,
- Function manual (402 pages) ,
- Manual (188 pages)
Table of Contents
Advertisement
Dimensions for the drill holes
Table 4- 2
Dimensions for the drill holes
"Standard" mounting rails
Length of the mounting rail D i stance a
160 mm
245 mm
482.6 mm
530 mm
830 mm
Additional fixing screws (for mounting rails > 530 mm)
For mounting rails > 530 mm, we recommend using additional fixing screws at intervals of ≤
500 mm on the identification groove.
Preparing the 2000 mm m ounting rail for installation
To prepare the 2000 mm mounting rail for installation, follow these steps:
1. Cut the 2000 mm mounting rail to the required length.
2. Mark the holes. The necessary dimensions can be found in the table "Dimensions for the
drill holes":
– Two drill holes at the beginning and end of the mounting rail
– Additional drill holes at equal intervals of 500 mm maximum, along the identification
3. Drill the marked holes according to the selected type of fastening.
4. Ensure that there are no burrs or shavings on the mounting rail.
Automation system
System Manual, 09/2016, A5E03461182-AD
D i stance b
10 mm
140 mm
10 mm
225 mm
8.3 mm
466 mm
15 mm
500 mm
15 mm
800 mm
groove
"L onger" mounting rails
Installation
4.2 Installing the mounting rail
51
Hide quick links:
Advertisement
Table of Contents
