Commissioning The Management Channel Between The Olt And The Gpon Ont - Huawei SmartAX MA5603T Configuration Manual

Access module

Hide thumbs Also See for SmartAX MA5603T:

Table of Contents

SmartAX MA5600T/MA5603T/MA5608T Multi-service

Access Module

Commissioning and Configuration Guide

service-port vlan 20 gpon 0/2/0 ont 0 gemport 0 multi-service user-vlan 20

1.4.7 Commissioning the Management Channel Between the OLT

and the GPON ONT

This topic describes how to commission the GPON OLT to ensure that the service configuration

and centralized management of the GPON ONTs are performed on the GPON OLT using the

ONT Management and Control Interface (OMCI) protocol.

Service Requirements

In the network as shown in

Figure 1-81 Example network for commissioning the management channel between the OLT

and the GPON ONT

192.168.1.100/24

Issue 01 (2014-04-30)

A GPON port on the MA5600T/MA5603T/MA5608T is connected to 128 ONTs using an

optical splitter.

The following considers ONT 0 as an example for commissioning the management channel between

the OLT and the GPON ONT.

On the MA5600T/MA5603T/MA5608T, you can configure ONTs at different locations in

a centralized manner.

The DBA profile is used to limit the user rate to the fixed 10 Mbit/s bandwidth.

192.168.1.200/24

Huawei Proprietary and Confidential

1-81, the service requirements are as follows:

1 Commissioning

Show Quick Links

Table of Contents

Smartax ma5600t Smartax ma5608t