Table of Contents
Advertisement
D-Link Unified Switch CLI Command Reference
Term
Definition
Server IP Address /
IP address or hostname of configured SNTP Server.
Hostname
Server Type
Address Type of Server.
Server Stratum
Claimed stratum of the server for the last received valid packet.
Server Reference
Reference clock identifier of the server for the last received valid packet.
ID
Server Mode
SNTP Server mode.
Server Maximum
Total number of SNTP Servers allowed.
Entries
Server Current
Total number of SNTP configured.
Entries
For each configured server:
Term
Definition
IP Address /
IP address or hostname of configured SNTP Server.
Hostname
Address Type
Address Type of configured SNTP server.
Priority
IP priority type of the configured server.
Version
SNTP Version number of the server. The protocol version used to query the server in unicast mode.
Port
Server Port Number.
Last Attempt Time Last server attempt time for the specified server.
Last Update Status Last server attempt status for the server.
Total Unicast
Number of requests to the server.
Requests
Failed Unicast
Number of failed requests from server.
Requests
T
Z
D
IME
ONE AND
AYLIGHT
clock timezone
This command configures the timezone by specifying an offset from the Coordinated Universal Time (UTC), which is
retreived from the SNTP server.
Default
none
Format
clock timezone offset <offset> minutes <offset> zone <offset>
Mode
Global Config
Term
Definition
offset
Replace <offset> with the number of hours your time zone differs from the UTC time, in the range
–12 to 13. A negative value indicates that the time zone later than the UTC, and a positive value
indicates a time zone that is earlier than the UTC.
© 2009 D-Link Corporation. All Rights Reserved
440
S
T
C
AVINGS
IME
OMMANDS
Advertisement
Table of Contents
