Table of Contents
Advertisement
Xmodem. SFTP and SCP are available as additional transfer methods if the software package supports secure
management.
Format
copy <source> <destination>
Mode
Privileged EXEC
Replace the <source> and <destination> parameters with the options in
use one of the following values:
{xmodem | tftp://<ipaddr|hostname>/<filepath>/<filename> [noval]
| sftp|scp://<username>@<ipaddr>|<ipv6address>|<filepath>|<filename>}
For TFTP, SFTP and SCP, the <ipaddr|hostname> parameter is the IP address or host name of the server, <filepath>
is the path to the file, and <filename> is the name of the file you want to upload or download. For SFTP and SCP, the
<username> parameter is the username for logging into the remote server via SSH.
Source
nvram:backup-config
nvram:clibanner
nvram:errorlog
nvram:fastpath.cfg
nvram:log
nvram:script
<scriptname>
nvram:startup-config
nvram:startup-config
nvram:traplog
system:running-config nvram:startup-config Saves the running configuration to nvram.
<url>
<url>
<url>
<url>
(DWS-4026) #copy tftp://1.1.1.1/file.scr nvram:script file.scr noval
<url>
<url>
<url>
<url>
<url>
Table 11: Copy Parameters
Destination
nvram:startup-config Copies the backup configuration to the startup configuration.
<url>
<url>
<url>
<url>
<url>
nvram:backup-config
<url>
<url>
nvram:clibanner
nvram:fastpath.cfg
nvram:script
<destfilename>
nvram:script
<destfilename> noval
nvram:sshkey-dsa
nvram:sshkey-rsa1
nvram:sshkey-rsa2
nvram:sslpem-dhweak
nvram:sslpem-dhstrong Downloads an HTTP secure-server certificate.
System Utility and Clear Commands
Table
11. For the <url> source or destination,
Description
Copies the CLI banner to a server.
Copies the error log file to a server.
Uploads the binary config file to a server.
Copies the log file to a server.
Copies a specified configuration script file to a server.
Copies the startup configuration to the backup configuration.
Copies the startup configuration to a server.
Copies the trap log file to a server.
Downloads the CLI banner to the system.
Downloads the binary config file to the system.
Downloads a configuration script file to the system. During the
download of a configuration script, the copy command validates
the script. In case of any error, the command lists all the lines at
the end of the validation process and prompts you to confirm
before copying the script file.
When you use this option, the copy command will not validate
the downloaded script file. An example of the CLI command
follows:
Downloads an SSH key file. For more information, see
Shell Commands" on page
Downloads an SSH key file.
Downloads an SSH key file.
Downloads an HTTP secure-server certificate.
481.
"Secure
435
Advertisement
Table of Contents
