Table of Contents
Advertisement
lldp med faststartrepeatcount
Use this command to set the value of the fast start repeat count. [count] is the number of LLDP PDUs that will be
transmitted when the product is enabled. The range is 1 to 10.
Default
3
Format
lldp med faststartrepeatcount [count]
Mode
Global Config
no lldp med faststartrepeatcount
Use this command to return to the factory default value.
Format
no lldp med faststartrepeatcount
Mode
Global Config
lldp med transmit-tlv all
Use this command to specify which optional Type Length Values (TLVs) in the LLDP MED set will be transmitted in the Link
Layer Discovery Protocol Data Units (LLDPDUs).
Default
By default, the capabilities and network policy TLVs are included.
Format
lldp med transmit-tlv all [capabilities] [ex-pd] [ex-pse] [inventory]
[location] [network-policy]
Mode
Global Config
Term
Definition
capabilities
Transmit the LLDP capabilities TLV.
ex-pd
Transmit the LLDP extended PD TLV.
ex-pse
Transmit the LLDP extended PSE TLV.
inventory
Transmit the LLDP inventory TLV.
location
Transmit the LLDP location TLV.
network-policy
Transmit the LLDP network policy TLV.
no lldp med transmit-tlv
Use this command to remove a TLV.
Format
no lldp med transmit-tlv [capabilities] [network-policy] [ex-pse] [ex-pd]
[location] [inventory]
Mode
Global Config
LLDP-MED Commands
141
Advertisement
Table of Contents
