Flexible Numbering - Samsung iDCS500 Manual
Hide thumbs
Also See for iDCS500:
- User manual (81 pages) ,
- Programming manual (410 pages) ,
- General description manual (97 pages)
Table of Contents
Advertisement
4-14
Chapter 4
Business Feature Package
Flash Key Operation
While a user is on an outside line, pressing the FLASH key will flash the central office or PBX. This is
used for custom calling features on C.O. lines or in conjunction with CENTREX/PBX operation.
System programming allows individual flash times for C.O. and PBX lines. When C.O. or PBX flash
is not required, setting the timers for two seconds releases the existing call and returns dial tone to
make a new call.
Flexible Numbering
System programming allows stations to have two, three or four digit extension numbers beginning
with the digit 2 or 3. Three digit default extension numbers begin with 201 and four digit defaults
begin with 2001. Station group numbers can be three or four digits beginning with the digit 5.
Using digits other than 2, 3 or 5 will require the technician to change other feature access codes in the
system default numbering plan. User guides will need to be modified as these are all written using
the iDCS 500 default numbering plan.
Hot Line
Stations can be programmed to call a pre-defined station or station group whenever that station goes
off-hook. A hot line delay timer of 0–250 seconds can be programmed to allow sufficient time to
make a different call.
In Group/Out of Group
Individuals assigned to a station hunt group may temporarily remove their telephones from the group
by pressing the In/Out of Group button providing that there is someone still in the group. The iDCS
500 has a system wide option to allow all members to log out of a station group. Stations out of a
group will not receive calls to that group but will continue to receive calls to their individual extension
numbers. When desired, the user may put him/herself back into the group by pressing the button
again. Users who do not have this button may dial the access code and the group desired. A station
user is allowed to be in several groups, providing a key and the extender of that group are assigned
for each group on the user's phone.
Incoming Call Distribution
Incoming calls can be assigned to ring a distributed station hunt group. This allows all members of
the group to share the call load.
Incoming/Outgoing Service
Outside lines are available for incoming or outgoing service. Programming allows any outside line
to be used for incoming calls only, outgoing calls only or both way service.
Indivdual Line Ccntrol
Each station in the system can be individually programmed to allow or deny dialing out as well as
allow or deny answering for each outside line.
Advertisement
Table of Contents
