Optipoint 500 Adapters; Figure 10-10 Optipoint 500 Option Bays - Siemens HiPath 5000 Service Manual

Hide thumbs Also See for HiPath 5000:

Table of Contents

optiPoint 500 Adapters

The different optiPoint 500 adapters (not optiPoint 500 entry and optiPoint 500 economy) allow

flexible expansion of the telephone workstation by providing additional device connections

(such as personal computers, fax equipment, telephones, headsets).

The adapters, which are connected on the bottom of the telephone, are plug "n" play". When a

new telephone adapter configuration is plugged in, it generates a reset; a setup message noti-

fies the system of the new configuration.

The user usually installs the adapter. The installation instructions are on the "Electronic Oper-

ating Instructions" CD.

Always disconnect the line cord before connecting adapters to the telephone or re-

moving them from the telephone.

Option bays:

2 x for optiPoint 500

advance (shown

1 x for optiPoint 500

basic and optiPoint

500 standard

Figure 10-10

optiPoint 500 Option Bays

P31003-H3560-S403-54-7620, 09/05

HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual

Workpoint Clients

optiPoint 500

Table of Contents

Hipath 3000 Hipath 3800