Siemens HiPath 5000 Service Manual page 789

Hide thumbs Also See for HiPath 5000:

Table of Contents

Standalone or networked HiPath 3000

systems without HiPath 5000 RSM

Save CDB and transfer to HiPath 3000.

Note on licensing the Feature Server

The Feature Server can be started without a license. In this case a message indicat-

ing that licensing needs to be performed is displayed.

Given that the Feature Server receives its license from the CDB of the first node, the

licensing dialog for this node must be opened first and, as a minimum requirement,

licensing must be performed using a .gcpf file. The first node must then be added to

the HiPath 3000/5000 network. The Feature Server now has its (grace period) li-

If the Feature Server is not licensed through the first node within one hour, the server

automatically stops operating after an hour has elapsed. When the server is restart-

ed there is a new one-hour period in which to perform licensing.

Preconfiguration can be performed in preparation for installation of a HiPath 3000/

5000 network for a customer. Licensing is required for the network at the preconfig-

uration stage. If there is no valid license file available, licensing can also be per-

formed using a GPCF file.

P31003-H3560-S403-54-7620, 09/05

HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual

Licensing for HiPath 3000 V6.0, HiPath 5000 V6.0

Activity (Remarks)

Networked HiPath 3000 systems with

Save CDB and transfer to HiPath 5000

RSM. The server transfers the CDB files

to the networked systems autonomously.

The HG 1500 boards are then registered

automatically.

Note: Unlike previous versions, this ver-

sion does not require a reset of the

HG 1500 boards. A reset should therefore

not be carried out. as it may disrupt data

HiPath 5000 RSM

licensing.fm

Chapters

Table of Contents

Hipath 3000 Hipath 3800