Table of Contents
Advertisement
8-1 General Information about the Editing System
Most of the systems introduced in this chapter are
capable of Editing. This chapter will describe how to
connect this unit with other equipment to make up
such systems and will give the precautions to be taken
in using the systems.
The equipment connected to this unit in the systems
introduced in this chapter include the following:
• BVE-9100/9000/2000/910/900/800/600 Video Editor
8-2 Systems with Editing Capability and Their
Applications
8-2-1 Editing under the Control of BVE-9100/9000/2000/910/900/600 Video
Editor
You can connect this unit to the BVE-9100/9000/2000/
910/900/600 Video Editor.
Settings of this unit
1
Set the REMOTE (9P)/LOCAL selector to
REMOTE (9P).
2
Set the SYNC signal selector to VIDEO.
3
Set the setup menu "rEF tcF" item as follows.
NTSC system
• For SMPTE time code drop frame: "2997 dF"
• For SMPTE time code non drop frame: "2997
ndF"
PAL/SECAM system
"25 Ebu"
Video sync signal
BVE-9100/9000/
9-pin remote
2000/910/900/600
Video Editor
Abbreviation used in this chapter
The following abbreviated expressions may be used
for simplicity.
• Fs (sampling frequency)
ex) sampling frequency 44.1 kHz : Fs = 44.1 kHz
• AES/EBU digital signal or AES/EBU D-I sync signal
(digital audio signal or D-I sync signal in the AES/
EBU format)
REF VIDEO INPUT
PCM-7040
4
Set "SYnc Pb" in the setup menu to "EnAbLE".
5
Press the SYNC REC key so that the incicator
lights up (ON).
Chapter 8 Application Systems
(Continued)
8-1
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
