3-4 About DAT Cassettes
For the types of DAT cassettes usable with this unit
see section "Specifications".
3-4-1 Loading and Unloading
Cassettes
Loading
1
Check that the POWER switch is set to "ON".
2
Insert a DAT cassette.
Push the cassette into the compartment.
The cassette loads automatically.
POWER switch
Unloading
Press the EJECT key before you turn the power off.
The EJECT key lights while the unit is ejecting the
cassette.
3-4-2 Preventing Accidental
Erasure
To prevent accidental erasure, set the safety tab on the
cassette to the position shown below. If you insert a
cassette with the tab hole open, the REC INH indicator
lights which prevents you from recording.
The hole is open:
Recording is inhibited.
Hole
The hole is covered:
Recording is possible.
Safety tab
3-11
Chapter 3 Preparations