Table of Contents
Advertisement
Switch on delay – Select switch on delay time for each display in a large matrix or video wall to
prevent AC inrush current. Use the PLUS/MINUS buttons to make selection (Off, Auto, 1-50 seconds
from switch on).
Heat status
This function allows you to check the thermal status of the display at any time. The accuracy of the
temperature indicated is 5 degrees.
Press the SET/PLUS button to view the heat status. Press the EXIT button to return to the previous
menu.
Date and time
Adjust current date and time for the display's internal clock.
Press the PLUS button to open the submenu. Press the UP/DOWN button to toggle between the Year,
Month, Day, Hour, Minute, and Daylight saving settings. Press the PLUS/MINUS button to adjust
all settings except Daylight saving time. Press the SET button to open the Daylight saving
submenu. Press PLUS/MINUS button to make a selection and then press UP/DOWN button to adjust.
Schedule
Note: We recommend that you set up the current date and time before using this function.
The Schedule function allows you to program up to seven different scheduled time intervals for the
display. You can select the time the displayturns on and turns off, the days in a week the displayis
activated, and which input source the displaywill use for each scheduled activation period.
1). Press the SET/PLUS button to open the submenu.
2). Press the UP/DOWN button to select a schedule item (item 1 through item 7), and then press the
PLUS button.
3). With the ON item highlighted, press the UP/DOWN button to set the hour when the displaywill be
turned on, then press the PLUS button to move to the minute slot to set the minute. If you do not want
to use a power on time, select "__" for the hour slot and minute slot.
4). Press the PLUS button to highlight the OFF item. Press the UP/DOWN button to set the hour when
the displaywill be turned off, then press the PLUS button to move to the minute slot to set the minute.
If you do not want to use a power off time, select "__" for the hour slot and minute slot.
5). Press the PLUS button to highlight the Input item, and then press the UP/DOWN button to select
an input source. If no input source is selected, the input source will remain the same as the last
selected input.
6). Press the PLUS button to select what days in a week this schedule item will be take effect, and
then press the SET button.
Philips BDL5545E
33
Hide quick links:
Advertisement
Table of Contents
