Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Philips BDL4671VL/00
Summary of Contents for Philips BDL4671VL/00
- Page 1 BDL4271VL BDL4671VL BDL5571VL www.philips.com/welcome User Manual (English)
-
Page 2: Safety Instructions
BDL4271VL / BDL4671VL / BDL5571VL Safety Instructions Warnings and Precautions KNOW THESE SAFETY SYMBOLS CAUTION: T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product. This symbol alerts you that important literature concerning operation and maintenance has been included with this product. Note to CATV system installers: This reminder is provided to call CATV system installer’s attention to Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I), that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical. -
Page 3: Regulatory Information
BDL4271VL / BDL4671VL / BDL5571VL Regulatory Information CE Declaration of Conformity We declare under our responsibility that the product is in conformity with the following standards: • EN60950-1:2006+A11:2009 (Safety requirement of Information Technology Equipment) • EN55022:2006+A1:2007 (Radio Disturbance requirement of Information Technology Equipment) • EN55024:1998+A1:2001+A2:2003 (Immunity requirement of Information Technology Equipment) • EN61000-3-2:2006 (Limits for Harmonic Current Emission) • EN61000-3-3:2008 (Limitation of Voltage Fluctuation and Flicker) following provisions of directives applicable • 2006/95/EC (Low Voltage Directive) • 2004/108/EC (EMC Directive) • 2005/32/EC (EuP, Energy-using Product Directive) EC No. 642/2009 Implementing • 93/68/EEC (Amendment of EMC and Low Voltage Directive) and is produced by a manufacturing organization on ISO9000 level. Federal Communications Commission (FCC) Notice (U.S. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. - Page 4 BDL4271VL / BDL4671VL / BDL5571VL Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, display, printer, and so on) should have the same power supply source. The phasing conductor of the room’s electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes (A). To completely switch off the equipment, the power supply cable must be removed from the power supply socket, which should be located near the equipment and easily accessible. A protection mark “B” confirms that the equipment is in compliance with the protection usage requirements of standards PN-93/T-42107 and PN-89/ E-06251. Electric, Magnetic and Electronmagnetic Fields (“EMF”) 1. We manufacture and sell many products targeted at consumers, which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals.
- Page 5 BDL4271VL / BDL4671VL / BDL5571VL Information for U.K. only WARNING - THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows: 1. Remove fuse cover and fuse. 2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or BSI approved type. 3. Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate 3-pin plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5A. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5A.
- Page 6 BDL4271VL / BDL4671VL / BDL5571VL China RoHS 中国电子信息产品污染控制标识要求 (中国RoHS法规标示要求) 产品中有毒有害物质或元素 的名称及含量 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr 6+) (PBB) (PBDE) 外壳 液晶面板 电路板组件 附件 (遥控器， 电源线， 连接线) 遥控器电池 O: 表 示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下. X: 表 示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11363-2006 标准规定的限量要求. 環保使用期限 此標識指期限(十年)，電子信息產品中含有的有毒有害物質或元素在正常使用的條件下不會發生外泄或突變...
- Page 7 SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA. Plassering/Ventilasjon ADVARSEL: NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å NÅ. End-of-Life Disposal Your new Public Information Display contains materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount to be disposed of. Please find out about the local regulations on how to dispose of your old display from your local Philips dealer. (For customers in Canada and U.S.A.) This product may contain lead and/or mercury. Dispose of in accordance to local-state and federal regulations. For additional information on recycling contact www.eia.org (Consumer Education Initiative) Waste Electrical and Electronie Equipment-WEEE Attention users in European Union private households This marking on the product or on its packaging illustrates that, under European Directive 2002/96/EG governing used electrical and electronic appliances, this product may not be disposed of with normal household waste.
-
Page 8: Table Of Contents
BDL4271VL / BDL4671VL / BDL5571VL Table Of Contents Unpacking and Installation ........1 3.5.1. Display control connection ....13 1.1. Unpacking ..............1 3.5.2. Digital video connection ....13 1.2. Package Contents .............1 3.5.3. Analog video connection ....13 1.3. Installation Notes ............1 3.6. -
Page 9: Unpacking And Installation
BDL4271VL / BDL4671VL / BDL5571VL Unpacking and Installation 1.1. Unpacking • This product is packed in a carton, together with the standard accessories. • Any other optional accessories will be packed separately. • Due to the size and weight of this display it is recommended for two people to move it. • After opening the carton, ensure that the contents are complete and in good condition. 1.2. Package Contents Please verify that you received the following items with your package content: • LCD display • CD ROM POWER VIDEO AUDIO SMART SOURCE SOURCE • Remote control with AAA batteries ON/OFF INPUT CHANGE • Power cord (1.8 m) CONTRAST... -
Page 10: Installing And Removing Table Stands
BDL4271VL / BDL4671VL / BDL5571VL 1.4. Installing and Removing Table Stands (optional) To install table stands: 1. Ensure your display is powered off. 2. Spread a protective sheet on a flat surface. 3. Grab the carrying handles and place the display face-down on the protective sheet. 4. After inserting the stand in the guide block, tighten the screws on both sides of the display. NOTE: T he longer side of the stand should face the front of the display. Carrying handle Thumbscrews Longer portions face the front Table stand To remove table stands: 1. -
Page 11: Mounting On A Wall
BDL4271VL / BDL4671VL / BDL5571VL 1.5. Mounting on a Wall To mount this display to a wall, you will have to obtain a standard wall-mounting kit (commercially available). We recommend using a mounting interface that complies with TUV-GS and/or UL1678 standard in North America. Protective Sheet VESA Grid Table Tabletop stand 1. Lay a protective sheet on a table, which was wrapped around the display when it was packaged, beneath the screen surface so as not to scratch the screen face. 2. Ensure you have all accessories for mounting this display (wall mount, ceiling mount, table stand, etc). 3. -
Page 12: Mounting In Portrait Position
BDL4271VL / BDL4671VL / BDL5571VL 1.6. Mounting in Portrait Position This display can be installed in portrait position. 1. Remove the table stand, if attached. 2. Rotate 90 degrees clockwise. The “ ” logo should be on the LEFT side when facing the display. 1.6.1. How to use the logo guider for portrait position 1. Put the guider on the lower-left corner of the front bezel of the display. Fold down both of its edges. 2. Peel off the protective film at the back of the “ ” logo sticker. Hold and press the guider with your left hand. -
Page 13: Parts And Functions
BDL4271VL / BDL4671VL / BDL5571VL Parts and Functions 2.1. Control Panel MUTE INPUT MENU NOTE: “Keyboard Control Lock Mode” This function completely POWER button disables the access to all Keyboard Control functions. To Use this button to turn the display on or put the display to standby. enable or disable the keyboard control lock, press both [ MUTE button and [ ] buttons and hold down continuously for more than 3 (three) seconds. Switch the audio mute ON/OFF. Remote control sensor and power status indicator INPUT button • Receives command signals from the remote control. -
Page 14: Input/Output Terminals
BDL4271VL / BDL4671VL / BDL5571VL 2.2. Input/Output Terminals 9 10 11 12 14 15 AC IN DVI OUT / VGA OUT AC power input from the wall outlet. DVI or VGA video output. MAIN POWER SWITCH VGA IN (D-Sub) Switch the main power on/off. VGA video input. AC OUT VGA AUDIO IN AC power supply to the AC IN jack of a media player. Audio input for VGA source (3.5mm stereo phone). COMPONENT IN (BNC) Connect your USB storage device. -
Page 15: Remote Control
BDL4271VL / BDL4671VL / BDL5571VL 2.3. Remote Control [DISPLAY] button Press to turn on/off the information OSD displayed on the upper right corner of the screen. 2.3.1. General functions [ ] button • Press to move the selection left in OSD menu. POWER • Press to decrease the value in OSD menu. • Press to move the sub-picture left in PIP mode. VIDEO AUDIO [SET] button SMART SOURCE SOURCE Press to activate the setting inside the OSD menu. [AUTO ADJUST] button Press to run the Auto Adjust function. NOTE: T his button is functional for VGA input only. ON/OFF INPUT CHANGE... -
Page 16: Inserting The Batteries In The Remote Control
BDL4271VL / BDL4671VL / BDL5571VL 2.3.2. Inserting the batteries in the remote control The remote control is powered by two 1.5V AAA batteries. To install or replace batteries: 1. Press and then slide the cover to open it. 2. Align the batteries according to the (+) and (–) indications inside the battery compartment. 3. Replace the cover. Caution: The incorrect use of batteries can result in leaks or bursting. Be sure to follow these instructions: • Place “AAA” batteries matching the (+) and (–) signs on each battery to the (+) and (–) signs of the battery compartment. • Do not mix battery types. • Do not combine new batteries with used ones. It causes shorter life or leakage of batteries. • Remove the dead batteries immediately to prevent them from liquid leaking in the battery compartment. Don’t touch exposed battery acid, as it can damage your skin. -
Page 17: Connecting External Equipment
BDL4271VL / BDL4671VL / BDL5571VL Connecting External Equipment 3.1. Using the Switch Cover A cover for the power switch is provided to prevent the display from being turned on or off accidentally. To lock the cover into position: 1. Align and insert the cover to the indentation located beside the power switch. 2. Use the screw to lock the cover. -
Page 18: Vcr/Vcd)
BDL4271VL / BDL4671VL / BDL5571VL 3.2. Connecting External Equipment (DVD/VCR/VCD) 3.2.1. Using COMPONENT video input Audio Out COMPONENT Out (YPbPr) DVD / VCR / VCD [AUDIO IN] [COMPONENT IN] (YPbPr) 3.2.2. Using HDMI video input DVD / VCR / VCD HDMI Out [HDMI IN]... -
Page 19: Connecting A Pc
BDL4271VL / BDL4671VL / BDL5571VL 3.3. Connecting a PC 3.3.1. Using VGA input VGA Out D-Sub 15 pin Audio Out [AUDIO IN] [VGA IN] [VGA AUDIO IN] 3.3.2. Using DVI input DVI Out Audio Out [AUDIO IN] [DVI IN] [VGA AUDIO IN] 3.3.3. -
Page 20: Connecting Audio Equipment
BDL4271VL / BDL4671VL / BDL5571VL 3.4. Connecting Audio Equipment 3.4.1. Connecting external speakers External speakers 3.4.2. Connecting an external audio device Audio In Stereo Amplifier [AUDIO OUT]... -
Page 21: Connecting Multiple Displays In A Daisy-Chain Configuration
BDL4271VL / BDL4671VL / BDL5571VL 3.5. Connecting Multiple Displays in a Daisy-chain Configuration You can interconnect multiple displays to create a daisy-chain configuration for applications such as a video wall. NOTE: M aximum 25 displays (5x5) can be used in a daisy-chain configuration. 3.5.1. Display control connection Connect the [RS232C OUT] connector of DISPLAY 1 to the [RS232C IN] connector of DISPLAY 2. DISPLAY 1 DISPLAY 2 [RS-232C] [RS-232C IN] [RS-232C OUT] [RS-232C IN] 3.5.2. Digital video connection Connect the [DVI OUT / VGA OUT] connector of DISPLAY 1 to the [DVI IN] connector of DISPLAY 2. DISPLAY 1 DISPLAY 2 [DVI]... -
Page 22: Connecting Usb Device
BDL4271VL / BDL4671VL / BDL5571VL 3.6. Connecting USB device Your display is fitted with a USB port that enables you to view photos, or play audio and video files stored on a USB storage device. Caution: The manufacturer is not responsible if the USB storage device is not supported, nor for any damage or loss of data caused by connecting your USB device. Supported format PHOTO: J PEG, BMP, PNG MUSIC: M P3, AAC, AC3, WAV VIDEO: A VI, MP4, MOV, MPG USB operation 5. -
Page 23: Playing Photo Files
BDL4271VL / BDL4671VL / BDL5571VL Playing photo files Playing music files 1. Press [ ] or [ ] button to move left or right to select Photo in 1. Press [ ] or [ ] button to move left or right to select Music in the the USB main screen. USB main screen. 2. Press [SET] button to enter the music folder. 3. Press [ ], [ ], [ ], or [ ] button to move left, right, up, or down to select the music you want to play. -
Page 24: Osd Menu
BDL4271VL / BDL4671VL / BDL5571VL OSD Menu 4.2. OSD Menu Overview An overall view of the On-Screen Display (OSD) structure is shown 4.2.1. Picture menu below. You can use it as a reference for further adjusting your display. 4.1. Navigating the OSD Menu Brightness Picture Contrast Screen Sharpness 4.1.1. Navigating the OSD menu using the Black level Audio remote control Noise reduction Tint Color... -
Page 25: Zoom Mode
BDL4271VL / BDL4671VL / BDL5571VL NOTE: T his item is functional only when {Color temperature} is set Clock phase to {User}. Adjust to improve the focus, clarity and stability of the image. Smart contrast NOTE: T his item is functional for VGA input only. When turned on, this function helps enhance image contrast when Zoom mode displaying dark scenes. The pictures you receive may be transmitted in 16:9 format (wide Smart picture screen) or 4:3 format (conventional screen). The 16:9 pictures sometimes have a black band at the top and bottom of the screen The following smart picture modes are available for: (letterbox format). • PC mode: {Standard} / {Highbright} / {sRGB}. This function allows you to optimize the picture display on screen. -
Page 26: Audio Reset
BDL4271VL / BDL4671VL / BDL5571VL Choose from: {HDMI} / {Audio1} / {Audio2} / {Audio3}. H position Moves the horizontal position of the image left Audio reset or right. Reset all settings in the Audio menu to factory preset values. Card OPS audio V position Select the analog or digital audio mode for card OPS. Moves the vertical position of the image up or down. 4.2.4. PIP menu Screen reset Picture Reset all settings in the Screen menu to factory preset values. PIP input Screen PIP change 4.2.3. Audio menu PIP size Audio PIP audio Balance... -
Page 27: Configuration1 Menu
BDL4271VL / BDL4671VL / BDL5571VL By pressing the [PIP ON/OFF] button on the remote control, you can Panel saving change the mode in the order shown below: Choose to enable the panel saving functions and thus reduce the risk of “image persistence” or “ghost-imaging”. PBP aspect PBP full • {Cooling Fan} - Select {On} to turn on the cooling fan all the time. Select {Auto} to turn on/off the cooling fan according to the display’s temperature. NOTES: The resolutions in the PIP and POP modes are configured as follows: • The default {Auto} option will start running the cooling fan PIP SIZE {Small} : 320 x 240 pixels if the temperature of 65°C (152°F) is reached, and will keep {Medium} : 480 x 320 pixels running for 30 minutes after cooling down to the temperature of 62°C (144°F). -
Page 28: Monitor Information
BDL4271VL / BDL4671VL / BDL5571VL Monitor information • IP address • Subnet mask Shows information about your display, including model number, serial • Default gateway number, operating hours and software version. • Login user name (The default user name is {admin}) • Login password (The default password is {0000}) Monitor information Configuration reset Reset all settings in Configuration1 menu to the factory preset values. Model name: BDL4671VL Serial no: Factory reset Operation hours: SW Version: VER 0.204 Reset all settings in the OSD menus of {Picture}, {Screen}, {Audio}, {PIP}, {Configuration1}, {Configuration2}, and {Advanced option} to the... - Page 29 BDL4271VL / BDL4671VL / BDL5571VL Scan conversion Example: 2 x 2 screen matrix (4 displays) H monitors = 2 displays Choose to enable or disable the IP (Interlace to Progressive) conversion V monitors = 2 displays function. • {Progressive} - Enable the IP conversion function (recommended). H monitors Once enabled, the interlace input signal will be converted to progressive format for better display quality. • {Interlace} - Disable the IP function. This mode is suitable for Position displaying motion pictures, but it increases the chance of image retention. Film mode Choose to turn on or off the film mode frame conversion function. • {Auto} - Enable the film mode frame conversion function for movies and motion pictures.
- Page 30 BDL4271VL / BDL4671VL / BDL5571VL Frame comp. - Off • Which input source the display will use for each scheduled activation period. NOTE: W e recommend you to set up current date and time in the {Date and time} menu before using this function. 1. Press [SET] or [ ] button to enter the submenu. Schedule Today 2012 . 08 . 04 20 : 19 : 55 Input Every day • Enable: Choose to enable or disable the Tiling function.
- Page 31 BDL4271VL / BDL4671VL / BDL5571VL • If there are two schedule items programmed for the same time, the highest numbered schedule takes priority. For example, if schedule items #1 and #2 both set the display to power on at 7:00 AM and off at 5:00 PM, then only schedule item # 1 will take effect. Monitor ID Set the ID number for controlling the display via the RS232C connection. Each display must have a unique ID number when multiple sets of this display are connected. DDC/CI Choose to turn on or off the DDC/CI communication function. Select {On} for normal use. Smart power Set the display to reduce the power consumption automatically. The options are: {Off} / {Medium} / {High}. Auto signal detection Choose to let the display detect and display available signal sources automatically.
-
Page 32: Input Mode
BDL4271VL / BDL4671VL / BDL5571VL Input Mode VGA Resolution: Active Resolution Standard Refresh Rate Pixel Rate Aspect Ratio Stand for Mode Resolution H Pixels V Lines 480 60 Hz 25.175 MHz 72 Hz 72 Hz 31.5 MHz Video Graphic Array 75 Hz 75 Hz 31.5 MHz WVGA 400 70 Hz 33.75 MHz 16:9 Wide Video Graphic Array 600 60 Hz 40 MHz SVGA Super VGA 75 Hz 75 Hz 49.5 MHz 768... -
Page 33: Pixel Defect Policy
We strive to deliver the highest quality products and use some of the industry’s most advanced manufacturing processes whilst practicing stringent quality control. However, pixel or sub-pixel defects on the PDP / TFT panels used in Plasma- & LCD- displays are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any Plasma- & LCD- displays with an unacceptable number of defects will be repaired during the warranty period in line with your local guarantee conditions. This notice explains the different types of pixel defects and defines the acceptable defect level for the BDL4230E LCD screen. In order to qualify for repair under warranty, the number of pixel defects must exceed a certain level as shown in the reference table. If the LCD screen is within specification a warranty exchange / claim back will be refused. Additionally, because some types or combinations of pixel defects are more noticeable than others, Philips sets even higher quality standards for those. 6.1. Pixels and Sub-Pixels A pixel, or picture element, is composed of three sub-pixels in the primary colors of red, green and subpixel blue. -
Page 34: Dark Dot Defects
Dark Dot Defects Black dot defects appear as pixels or sub-pixels that are always dark or “off ”. These are the examples of black dot defects: One dark dot Two adjacent dark dots = 1 pair of dark dots Two dark dots, specifications defines the minimum distance between dark dots 6.5. Proximity of Pixel Defects Because pixel and sub-pixels defects of the same type that are nearby one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. In the table below you can find specifications about: • Allowed amount of adjacent dark dots = (adjacent dark dots =1 pair of dark dots) • Minimum distance between dark dots • Total no. of all defective dots 6.6. Pixel Defect Tolerances In order to qualify for repair due to pixel defects during the warranty period, a PDP / TFT panel in a Philips Plasma / LCD- display must have pixel or sub- pixel defects exceeding the tolerances listed in the following table. -
Page 35: Cleaning And Troubleshooting
BDL4271VL / BDL4671VL / BDL5571VL Cleaning and Troubleshooting 7.1. Cleaning Caution When Using the Display • Do not bring your hands, face or objects close to the ventilation holes of the display. The top of the display is usually very hot due to the high temperature of exhaust air being released through the ventilation holes. Burns or personal injuries may occur if any body parts are brought too close. Placing any object near the top of the display could also result in heat related damage to the object as well as the display itself. • Be sure to disconnect all cables before moving the display. Moving the display with its cables attached may damage the cables and thus cause fire or electric shock. • Disconnect the power plug from the wall outlet as a safety precaution before carrying out any type of cleaning or maintenance procedure. Front Panel Cleaning Instructions • The front of the display has been specially treated. Wipe the surface gently using only a cleaning cloth or a soft, lint-free cloth. • If the surface becomes dirty, soak a soft, lint-free cloth in a mild detergent solution. -
Page 36: Troubleshooting
BDL4271VL / BDL4671VL / BDL5571VL 7.2. Troubleshooting Symptom Possible Cause Remedy No picture is displayed 1. The power cord is disconnected. 1. Plug in the power cord. 2. The main power switch on the back of the 2. Make sure the power switch is switched on. display is not switched on. 3. Connect a signal connection to the display. 3. The selected input has no connection. 4. The display is in standby mode. Interference displayed on the display or audible Caused by surrounding electrical appliances or Move the display to another location to see is the noise is heard... -
Page 37: Technical Specifications
BDL4271VL / BDL4671VL / BDL5571VL Technical Specifications 8.1. BDL4271VL Display: Item Specifications Screen Size (Active Area) 42” LCD Aspect Ratio 16:9 Number of pixels 1920 (H) x 1080 (V) Pixel pitch 0.4845 (H) x 0.4845 (V) [mm] Displayable colors 1073M colors Brightness (typical) 700 cd/m2 Contrast ratio (typical) 4000:1 Viewing angle 178 degrees In/Out Terminals: Item Specifications Speaker Output Internal Speakers 10W (L) + 10W (R) [RMS]/8Ω External Speakers 1 Way 1 Speaker System 82 dB/W/M/160 Hz ~ 13 KHz Audio Output RCA Jack x 2 0.5V [rms] (Normal) / 2 Channel (L+R) Audio Input RCA Jack x 2... - Page 38 BDL4271VL / BDL4671VL / BDL5571VL Dimensions (Without Stand) [W x H x D] 965.8 x 558.8 x 69 mm Weight (With Stand) 20.3 Kg Weight (Without Stand) 18.3 Kg Gross Weight (Without Stand) 23.8 Kg Environmental Condition: Item Specifications Temperature Operational 0 ~ 40°C Storage -20 ~ 60°C Humidity Operational 20 ~ 80% RH (No condensation) Storage 5 ~ 95% RH (No condensation) Altitude Operational 0 ~ 3,000 m Storage / Shipment 0 ~ 9,000 m Internal Speaker: Item Specifications Type 1 Way 1 Speaker Input 10 W (RMS) Impedance 8Ω...
-
Page 39: Bdl4671Vl
BDL4271VL / BDL4671VL / BDL5571VL 8.2. BDL4671VL Display: Item Specifications Screen Size (Active Area) 46” LCD Aspect Ratio 16:9 Number of pixels 1920 (H) x 1080 (V) Pixel pitch 0.17675 (H) x 0.53025 (V) [mm] Displayable colors 1073.7M colors Brightness (typical) 700 cd/m2 Contrast ratio (typical) 4000:1 Viewing angle 178 degrees In/Out Terminals: Item Specifications Speaker Output Internal Speakers 10W (L) + 10W (R) [RMS]/8Ω External Speakers 1 Way 1 Speaker System 82 dB/W/M/160 Hz ~ 13 KHz Audio Output RCA Jack x 2 0.5V [rms] (Normal) / 2 Channel (L+R) Audio Input RCA Jack x 2 0.5V [rms] (Normal) / 2 Channel (L+R) 3.5 mm Stereo x 1... - Page 40 BDL4271VL / BDL4671VL / BDL5571VL Weight (Without Stand) 22.0 Kg Gross Weight (Without Stand) 27.5 Kg Environmental Condition: Item Specifications Temperature Operational 0 ~ 40°C Storage -20 ~ 60°C Humidity Operational 20 ~ 80% RH (No condensation) Storage 5 ~ 95% RH (No condensation) Altitude Operational 0 ~ 3,000 m Internal Speaker: Item Specifications Type 1 Way 1 Speaker Input 10 W (RMS) Impedance 8Ω Output Sound Pressure 82 dB/W/M Frequency Response 160 Hz ~ 13 KHz...
-
Page 41: Bdl5571Vl
BDL4271VL / BDL4671VL / BDL5571VL 8.3. BDL5571VL Display: Item Specifications Screen Size (Active Area) 55” LCD Aspect Ratio 16:9 Number of pixels 1920 (H) x 1080 (V) Pixel pitch 0.21 (H) x 0.63 (V) [mm] Displayable colors 1073.7M colors Brightness (typical) 700 cd/m2 Contrast ratio (typical) 4000:1 Viewing angle 178 degrees In/Out Terminals: Item Specifications Speaker Output Internal Speakers 10W (L) + 10W (R) [RMS]/8Ω External Speakers 1 Way 1 Speaker System 82 dB/W/M/160 Hz ~ 13 KHz Audio Output RCA Jack x 2 0.5V [rms] (Normal) / 2 Channel (L+R) Audio Input RCA Jack x 2 0.5V [rms] (Normal) / 2 Channel (L+R) 3.5 mm Stereo x 1... - Page 42 BDL4271VL / BDL4671VL / BDL5571VL Weight (Without Stand) 30.6 Kg Gross Weight (Without Stand) 36.1 Kg Environmental Condition: Item Specifications Temperature Operational 0 ~ 40°C Storage -20 ~ 60°C Humidity Operational 20 ~ 80% RH (No condensation) Storage 5 ~ 95% RH (No condensation) Altitude Operational 0 ~ 3,000 m Internal Speaker: Item Specifications Type 1 Way 1 Speaker Input 10 W (RMS) Impedance 8Ω Output Sound Pressure 82 dB/W/M Frequency Response 160 Hz ~ 13 KHz...
- Page 43 2012 © Koninklijke Philips Electronics N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips Electronics N.V. and are used under license from Koninklijke Philips Electronics N.V. Specifications are subject to change without notice.