Table of Contents
Advertisement
3.5 CONFIGURATION1
Switch on state
Set the display to turn on or remain off when the power cord is connected to a wall outlet.Press the
SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle between
Power off - Select to power off the display.
Forced on - Select to power on the display.
Last status – Select to turn the display on or off depending on the last power status (i.e no
change to the status).
Auto adjust
Note: For VGA input only.
Use this function to let the display automatically optimize the display of VGA input image.
Press the SET/PLUS button to open the submenu, and then press the SET button to adjust.
Power save
Set the display to reduce the power automatically.
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle
between
PC - Select ON to make the monitor enter DPMS mode (Display Power Management Signaling)
when no signal can be detected from the DisplayPort, HDMI, DVI-D, and VGA inputs after three
successive cycles. Use the PLUS/MINUS button to make selection.
VIDEO - Select ON to make the display enter power saving mode when no signal is detected from
the
Component
input after three successive cycles. Use the PLUS/MINUS button to make selection.
Language
Select the language for the OSD menu.
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle
between
English
Polski
Türkçe
Deutsch
Pycc
Français
Italiano
Español
Philips BDL5545E
27
Hide quick links:
Advertisement
Table of Contents
