Miele H6560BP Operating And Installation Instructions page 94
Hide thumbs
Also See for H6560BP:
- Operating and installation instructions (144 pages) ,
- Operating and installation instructions (148 pages) ,
- Operating and installation instructions (104 pages)
Table of Contents
Advertisement
Frequently asked questions
Problem
The oven lighting does
not turn on.
The oven light will not
turn on.
There is soiling in the
over after the Self Clean
program.
94
Possible cause and solution
The halogen bulb needs to be replaced.
Danger of burns!
Make sure the heating elements are turned off and
allowed to cool completely.
Disconnect the appliance from the power supply.
Turn the lamp cover a quarter turn counter-
clockwise to release it and then pull it together
with its seal downwards to take it out.
Replace it with a new halogen bulb (Sylvania
66740, 120 V, 40 W, G9, FS1).
Refit the lamp cover together with its seal and turn
it clockwise to secure.
Reconnect the oven to the electrical supply.
The halogen bulb needs to be replaced.
Danger of burns!
Make sure the heating elements are turned off and
allowed to cool completely.
Disconnect the appliance from the power supply.
Remove the side runners.
Loosen the bulb cover with the tool supplied from
the frame.
Replace it with a new halogen bulb (Sylvania
66740, 120 V, 40 W, G9, FS1).
Press the lamp cover back into its frame and refit
the side runners.
Reconnect the oven to the electrical supply.
The Self Clean program burns off soiling in the oven
and leaves it as ash.
Using a soft sponge, warm water and liquid dish
soap remove the ashes.
If coarse soiling remains, start the Self Clean
program again with a longer duration.
Hide quick links:
Advertisement
Table of Contents
