Miele H6560BP Operating And Installation Instructions page 14

Hide thumbs Also See for H6560BP:

Table of Contents

IMPORTANT SAFETY INSTRUCTIONS

Scratches on the door glass can cause the glass to break.

Do not use abrasive cleaners, hard sponges, brushes or sharp metal

tools to clean the door glass.

The shelf runners can be removed for cleaning purposes (see

"Cleaning and care"). Ensure they are correctly fitted after cleaning

and never operate the oven without the shelf runners inserted.

There is a seal around the oven interior which seals the inside of

the door. Take care not to rub, damage or move the gasket.

Do not use oven cleaners. Commercial oven cleaners or oven

liners of any kind should not be used in or around any part of the

oven.

Debris should be removed before running the Self Clean program.

If not removed this debris can smoke causing the self-cleaning

program to turn itself off.

Accessories

Use only genuine original Miele parts. If parts or accessories from

other manufacturers are used, the warranty will become void.

If you have a Miele Gourmet Casserole Dish HUB 5000-M/HUB

5001-M/ HUB 5000-XL do not place it on shelf level 1. This can

damage the oven floor. The small gap between the bottom of the

dish and the oven floor would cause a build-up of heat and could

cause the enamel to crack or chip.

Do not place Miele Casserole Dishes on the top rail of shelf level 1,

they will not be secure in this position by the anti-tip safety notches

on the sides of the dish.

Use self level 2 for these dishes.

Only use the Miele roast probe supplied with this oven. If it is

faulty, it must only be replaced with a Miele genuine roast probe.

Very high temperatures can damage the roast probe and cause

the silicon to melt. Do not keep the roast probe in the oven. Do not

use the roast probe in Broil modes (except for Convection Broil).

Table of Contents

Show Quick Links

Table of Contents

H6660bp