CHAPTER 3 MECHANICAL SYSTEMS
Mounting the Cutter Motor
3) Turn the drive pin [4] of the cutter mo-
tor to be mounted newly, so that the
cam hole [5] of the trimmer body is
matched to the pin; then, mount the mo-
tor using 5 screws [1]. Thereafter, con-
nect the 2 connectors [2].
(If the grease on the drive pin of the cut-
ter motor to be mounted newly is not
adequate, be sure to apply an appropri-
ate amount of it before starting the
mounting work.)
3-34
COPYRIGHT© 2002 CANON INC.
F03-509-03
F03-509-04
2000
CANON BOOKLET TRIMMER-A1 REV.0 FEB. 2002