Table of Contents
Advertisement
"RF680M" software
9.5 The functions in the "Tag" menu
Read tag data
If you click the "Read" button in the data editor (or press <Ctrl+R>), you can read the data
from the tag. The read-in data appears in the editor.
"Read" button
Reading the data area of a tag
In the data editor, you can use the drop-down list box to select the required memory area of
the tag whose data you want to read, and reduce it, if required, by removing the check mark
from "Complete" and entering the address and length in the respective fields.
Read complete tag
If all memory areas of the tag are to be completely read or written together, set the check
mark for "Complete".
With this function you can display the complete size of the selected memory area.
If the check mark is set for "Complete", "Read all" and "Write all" are displayed on the
buttons.
Figure 9-7
Note
ID check
It is checked for all tags before any read or write procedure whether the tag ID displayed in
the editor corresponds to the ID of the tag that is located in the field of the SIMATIC
RF680M. If this is not the case, time-out will be displayed after 20 seconds.
64
"Read All" button
Operating Instructions, 06/2011, J31069-D0241-U001-A2-7618
SIMATIC RF680M Mobile Reader
Advertisement
Table of Contents
