Table of Contents
Advertisement
Commissioning
5.4 Basic settings in the operating system
All changes, e.g. a new password for the operating system, are now stored in the back-up
secure against power failure.
See also
System reset (Page 89)
5.4
Basic settings in the operating system
5.4.1
Operating modes
Operating modes
The SIMATIC RF680M device has two operating modes:
1. "Supervisor Mode"
2. "User Mode"
Changing the operating mode
You can change the operating mode in the "Security Level" settings. "Start > Security" is
used for changeover:
Figure 5-3
Changeover to "Supervisor Mode" is password-protected. On delivery, this password is set
to "123456" and should be changed the first time it is used for security reasons.
See also
System reset (Page 89)
22
Configuration and settings for the SIMATIC RF680M Mobile Reader.
Default mode. The user can only use the installed service and
test applications. The start menu functionality is restricted.
Operating mode
Operating Instructions, 06/2011, J31069-D0241-U001-A2-7618
SIMATIC RF680M Mobile Reader
Advertisement
Table of Contents
