Table of Contents
Advertisement
Custom Input Label (RGB)
Selects when "RGB" is selected in "Video
Input".
Custom Input Label (YPbPr)
Selects when "YPbPr" is selected in "Video
Input".
Video3
Link to Mic
Allows you to select whether to link an
audio input to the selected video input.
Link to Audio Input
Allows you to switch the audio input in
conjunction with switching the video input
by linking each video input and a specific
microphone or other audio input.
Off: Switches the video input and the
microphone or other audio input
separately.
On: Links switching of the video input and
the microphone or other audio input.
Note
When "Link to Audio Input" is set to "On",
"Audio Input", "Input Select (MIC)" and
"Input Select (AUX)" on the Basic Setup1
page of Audio setup menu cannot be selected.
Video Input
Allows you to select the video input.
Camera: Selects the camera picture from
the camera connected to the CAMERA
connector.
RGB: Selects the picture from the external
equipment connected to the RGB IN
connector.
YPbPr: Selects the picture from the external
equipment connected to the YPbPr
jacks.
Audio Input
Allows you to select the audio input which is
linked to the video input selected in "Video
Input" when "Link to Audio Input" is set to
"On".
MIC: Inputs audio from the microphone.
AUX: Inputs audio from the external
equipment.
MIC+AUX: Inputs audio both from the
microphone and external equipment.
68
Registering Local Information
Input Select (MIC)
Input Select (AUX)
Allows you to select the audio input from the
microphone and/or external equipment
when "Link to Audio Input" is set to "On".
The options that can be selected vary with
the Audio Input setting.
When you select "MIC" from "Audio
Input", you can select one of the following
two options. When you select "AUX", you
can only select "AUDIO". When you select
"MIC+AUX", you can select "MIC (A1/
A3)", for microphone input, and "AUDIO"
for auxiliary external input.
MIC (A1/A3): Select use of the PCS-A1
microphone (supplied) or PCSA-A3
microphone (not supplied) connected to
the MIC (A1/A3) jacks on the
Communication System.
AUDIO: Select to input the audio of
external equipment connected to the
AUDIO IN jack on the Communication
System.
LAN Setup Menu
The LAN setup menu is used to set up LAN
connection.
For details about the settings, consult your
network administrator.
LAN
Basic Setup:
LAN1
Host Name
Enter your host name (up to 30 characters).
DHCP Mode
Allows you to select whether the Dynamic
Host Configuration Protocol (DHCP) server
is enabled.
Auto: The IP address, network mask,
gateway address and DNS address are
automatically assigned.
Off: Disables the DHCP server. In this case,
enter an IP address, network mask,
gateway address and DNS address.
Prefix Length
Configure the prefix length of the IPv6
address within the range of 0 to 128.
Advertisement
Table of Contents
