Using a Second Camera
You can connect the second camera through the PCSA-CG70/CG70P Camera
Unit.
Connection example for a second camera
First camera (PCSA-CG70/CG70P)
/
LAN ALERT
ON LINE
VIDEO IN
AUDIO IN
Y
Pb
Pr
L
to VIDEO IN
YPbPr
Connect the video output connector on the second camera to the VIDEO IN
YPbPr jacks on the front of the Communication System or the RGB IN
connector at the rear.
Select "RGB" or "YPbPr" in "Second Camera Input" of the Camera setup
menu depending on the connector to which the camera is connected. (page 75)
To switch the picture shot by two cameras
When you open the Camera menu, the instruction "F2: Switches to the first
camera." or "F2: Switches to the second camera." is displayed at the bottom of
the monitor screen. Each press of the F2 button on the Remote Commander
changes the picture shot by each camera.
For the procedure how to open the Camera menu, see "Adjusting the Camera"
on page 128.
VISCA cable
(supplied)
to VISCA OUT
TERMINAL
VISCA OUT
OPEN
OPEN
R
MAINTENANCE
Video cable (not supplied)
Second camera
to VISCA IN
Using a Second Camera
to Video
output
(YPbPr)
159