Table of Contents
Advertisement
Loading Paper
Your machine has two built-in trays (tray 1 and MP tray) (e-STUDIO332S is a Manual Feeder) and an
optional tray (tray 2).
This section explains the supported paper and capacity of tray 1 and how to load paper into the tray 1.
After you load paper, you need to register the loaded paper on your machine.
To complete the loading procedures, follow the 2 steps below:
●
"Step 1 Loading Paper into Tray 1" P.23
●
"Step 2 Configuring the Settings for Tray 1" P.24
„ Tray 1 Specification
Supported paper size
● A4
● A5*
● B5
● A6*
● Letter
● Legal 13
● Legal 13.5
● Legal 14
● Executive
● Statement*
● 16K (184 x 260 mm)
● 16K (195 x 270 mm)
● 16K (197 x 273 mm)
● Custom
Note
● Duplex printing cannot be performed on paper marked with "*".
Reference
● For the specifications and how to load paper in tray 2 (optional), MP tray, and manual feeder, refer to the User's Manual
(Basic) > "1. Setup" > "Loading Paper and Documents" > "Paper" > "Loading Paper".
Step 1 Loading Paper into Tray 1
1
Pull out tray 1.
Paper capacity
250 sheets
(when paper weight is 80 g/m
- 23 -
Paper weight
● Light
2
2
)
60 to 63 g/m
● Medium Light
2
64 to 74 g/m
● Medium
2
75 to 87 g/m
● Medium Heavy
88 to 104 g/m
● Heavy
105 to 122 g/m
2
Slide the paper guide (1) to the width of
the paper to be loaded.
1
3
Slide the paper stopper (2) to the length
of the paper to be loaded.
Installing Your Machine
(16 to 17 lb)
(18 to 19 lb)
(20 to 23 lb)
2
(24 to 27 lb)
2
(28 to 32 lb)
2
1
- Quick Links:
- Machine Setup
- Installing Your Machine
Hide quick links:
Advertisement
Table of Contents
