Viewing Information About A Host; Host Properties; Mapping Properties; Viewing Information About An Enclosure - HP P2000 G3 Reference Manual
Storageworks msa system
Hide thumbs
Also See for P2000 G3:
- Cli reference manual (532 pages) ,
- User manual (76 pages) ,
- Reference manual (68 pages)
Table of Contents
Advertisement
•
Profile.
• Standard: LUN 0 can be assigned to a mapping.
• OpenVMS: LUN 0 cannot be assigned to a mapping.
• HP-UX: LUN 0 can be assigned to a mapping and the host uses Flat Space Addressing.
Viewing information about a host
In the Configuration View panel, right-click a host and select View > Overview. The Host Overview table
shows:
•
Host properties
•
The quantity of mappings for the host
Select a component to see more information about it.
Host properties
When you select the Host component, the Properties for Host table shows:
•
Host ID. WWPN or IQN.
•
Name. User-defined nickname for the host.
•
Discovered. If the host was discovered and its entry was automatically created, Yes. If the host entry
was manually created, No.
•
Mapped. If volumes are mapped to the host, Yes; otherwise, No.
•
Host Type. FC or iSCSI.
•
Profile.
• Standard: LUN 0 can be assigned to a mapping.
• OpenVMS: LUN 0 cannot be assigned to a mapping.
• HP-UX: LUN 0 can be assigned to a mapping and the host uses Flat Space Addressing.
Mapping properties
When you select the Maps component, the Maps for Host table shows:
•
Type. Explicit or Default. Settings for an explicit mapping override the default mapping.
•
Name. Volume name.
•
Serial Number. Volume serial number.
•
Ports. Controller host ports through which the volume is mapped to the host.
•
LUN. Volume identifier presented to the host.
•
Access. Volume access type: read-write, read-only, no-access (masked), or not-mapped.
Viewing information about an enclosure
In the Configuration View panel, right-click an enclosure and select View > Overview. You can view
information about the enclosure and its components in a front or rear graphical view, or in a front or rear
tabular view.
•
Front Graphical. Shows a graphical view of the front of each enclosure and its disks.
•
Front Tabular. Shows a tabular view of each enclosure and its disks.
•
Rear Graphical. Shows a graphical view of components at the rear of the enclosure.
•
Rear Tabular. Shows a tabular view of components at the rear of the enclosure.
In any of these views, select a component to see more information about it. Components vary by enclosure
model. If any components are unhealthy, a table at the bottom of the panel identifies them.
HP StorageWorks P2000 G3 MSA System SMU Reference Guide
99
Advertisement
Table of Contents
