Recording and Playback
Recording
Images can be recorded manually or via contact switch.
This section describes how to record manually.
For details on configuring patient information and storage
destinations for recorded data beforehand, see
"Recording Preparation" (page 50).
Note
For details on how to record via contact switch, contact
your local Sony representative.
Note on the auto delete function for
recorded data
Whenever the remaining capacity on the unit's internal
hard disk becomes low, an auto delete function
automatically deletes recorded data, starting with the
oldest start dates for recording. This is done to maintain
free space on the unit's internal hard disk at all times.
Recorded data that has already been saved to external
media will be the first to be deleted automatically.
44
Recording
Chapter
Manual Recording
1
Press the z REC button on the infrared remote control
unit or the front panel of the unit.
Infrared remote control unit
zREC button
Front panel
Recording starts.
For the HVO-3000MT, if [Simultaneous 3D and 2D
Rec] is set to [Yes] in the [System Admin Settings]
screen - [3D/2D Settings] screen, both 3D and 2D
videos will be recorded.
4
zREC button