Securing And Aligning The Furniture Door - Miele KF 1801 Vi Operating And Installation Instructions
Miele kf 1801 vi; kf 1811 vi; kf 1901 vi; kf 1911 vi fridge-freezer combination
Hide thumbs
Also See for KF 1801 Vi:
- Operating and installation instructions (96 pages) ,
- Specification (3 pages) ,
- Operating and installation manual (88 pages)
Table of Contents
Advertisement
Securing and aligning the
furniture door
^ Insert the angle trim m as far as it will
go into the spaces in the frame, as
shown.
^ Open the appliance door and hang
the furniture front on its frame onto
the threaded bolts, as shown n.
^ Press the pieces of angle trim m on
both sides into the white plastic
frame, and screw them down
securely. Spare screws can be found
in the plastic bag marked "E".
^ Screw the nuts o loosely onto the
threaded bolts, but do not tighten yet.
^ Close the door and check the
distance between the door and
neighbouring furniture doors.
^ Align the height of the appliance door
by sliding it over the threaded bolts
n.
^ Align the depth of the refrigerator
door via the gaps in the angle trim m.
Then screw the angle trim into
position.
^ Now screw on the top nuts o. The
door is now fixed.
Repeat the steps from "Preparing
the furniture fronts" to fit the furniture
front to the freezer drawer.
The positioning of the freezer drawer
front must be aligned to that of the
refrigerator door front.
Installation
89
Hide quick links:
Advertisement
Table of Contents
