Table of Contents
Advertisement
Changing the Paper Size
This section describes how to change the paper size.
• Procedures for changing the paper size differ depending on the tray (Tray 2 and 3 or other optional
paper tray units). Make sure you are following the appropriate procedure before you begin.
• Be sure to select the paper size with User Tools. If you do not, misfeeds might occur. For details about
Tray Paper Size, see "System Settings", Network and System Settings Guide
• Fan the paper before loading.
• Straighten curled or warped paper before loading.
• For details about paper sizes and types, see "Recommended Paper Sizes and Types".
• p.114 "Recommended Paper Sizes and Types"
Changing the Paper Size in Tray 2 and 3
This section describes how to change the paper size in Tray 2 and 3.
• If a paper tray is pushed vigorously when putting it back into place, the position of the tray's side
fences may slip out of place.
• Do not stack paper over the limit mark.
• Check the paper edges are aligned with the right side.
• Slide the side fences until they are aligned with the paper size, and then re-lock the side fences.
1.
Check that paper in the paper tray is not being used, and then pull the tray carefully out
until it stops.
BQX051S
Changing the Paper Size
.
103
3
- Quick Links:
- Adding Toner
- Inserting Toner
Hide quick links:
Advertisement
Table of Contents
