Wlsn Door-Window Contact; Wlsn Recessed Door-Window Contact - Bosch ICP-EZM2 Easy Series System Reference Manual
Easy series
Hide thumbs
Also See for ICP-EZM2 Easy Series:
- Installer's manual (80 pages) ,
- System reference manual (118 pages) ,
- Quick start manual (24 pages)
Table of Contents
Advertisement
Easy Series
10.9
wLSN Door-Window Contact
The wLSN Door-Window Contact is a magnetic reed switch and wireless transceiver used for
monitoring doors, windows, and other dry contact devices.
A cover-and-wall tamper switch transmits a tamper signal when the cover is removed from its
base, or when the unit is pulled away from the wall.
An LED provides status for RFSS and Discovery Modes.
Specifications
868 MHz
915 MHz
Maximum Distance Between Sensor and
Magnet
Wire Gauge
Power/Voltage
Terminal Block
EN50131-1
Supported Wiring Configurations
The wLSN Door-Window Contact provides a supervised point for monitoring external devices.
Refer to Section 2.2.7 Connect Supervised Points on page 19 for supported wiring options
when using the supervised point.
10.10
wLSN Recessed Door-Window Contact
The wLSN Recessed Door-Window Contact is a wireless transceiver used for monitoring doors
A cover tamper switch transmits a tamper signal when the cover is removed from its base.and
windows.
An LED provides status for RFSS and Discovery Modes.
NOTICE!
i
Mounting the wLSN Recessed Door-Window Contact in a metal door or window frame could
degrade the RF signal strength.
Specifications
868 MHz
915 MHz
Power/Voltage
Maximum Distance Between Reed
Switch and Magnet
Drill Tools
Circuit Board Removal
EN50131-1
Bosch Security Systems, Inc.
ISW-BMC1-S135X
ISW-BMC1-S135Y
<12,7 mm, the magnet can be placed on either side.
The base is marked to indicate the magnet position.
0.14 mm (22 AWG) to 1.5 mm (16 AWG)
Two AA batteries, 1.5 V alkaline
For connecting other dry contact devices such as another magnetic reed
switch. (2.2k EOL)
Security Grade 2, Environmental Class II
ISW-BMC1-R135X
ISW-BMC1-R135Y
One CR2 lithium battery, 3 VDC
<12,7 mm
Requires the use of a 19 mm (3/4 in.) drill bit and 22 mm
(7/8 in.) spade bit
Needle nose pliers are recommended
Security Grade 2, Environmental Class II
System Reference Guide
Device Specifications and Overview | en
F01U087835 | 02 | 2008.10
83
Advertisement
Table of Contents
