Mains Supply - Bosch FPC-500-2 Installation Manual

Conventional fire panel

Hide thumbs Also See for FPC-500-2:

Table of Contents

en | Installation

3.2.4

Mains Supply

The fire panel requires a 230 V mains supply for the power

supply. Route the power supply so that the line does not cross

or touch the signal line.

Use the left M 20 x 1.5 screw joint (PG13.5) on the upper side

of the panel for the 230 V mains supply.

Notice!

Note local regulations when connecting to 230 V power

supplies.

Wire up the 230 V power supply to the screw clamp provided on

the power supply unit board. Use a cable tie to ensure strain

relief of the power supply feeder in the housing above the

power supply unit.

Danger!

Only perform installation work when the panel has no voltage.

There is a danger of an electric shock.

2014.06 | 7.0 | F.01U.172.980

Conventional Fire Panel

50 - 60 Hz

Bosch Sicherheitssysteme GmbH

230 VAC

N L

Table of Contents

Show Quick Links

Table of Contents

Fpc-500-4 Fpc-500-8