Before Pairing and Calibrating
EN
This section describes how to pair and calibrate the pedaling monitor sensor that is installed on the bicycle to the Cyclocomputer
SGX-CA500.
•
See the User's Manual or the User's Guide (online manual) of the Cyclocomputer SGX-CA500 regarding how to operate it.
Pairing and Calibrating Procedure
Use the following procedure to pair and calibrate the product.
1.
Placing the bicycle in a secure work position (page 18)
2.
Pairing the pedaling monitor sensor (page 19)
3.
Calibrating the zero point (page 23)
4.
Checking the calibration (page 24)
Placing the Bicycle in a Secure Work Position
Place the bicycle in a level location, such as on a repair stand or indoor trainer.
Be sure to secure it so that it will not fall while you are working.
18