HP 800 User Manual page 537
Network access controller 800
Hide thumbs
Also See for 800:
- User manual (586 pages) ,
- Manual (106 pages) ,
- Installation manual (34 pages)
Table of Contents
Advertisement
Ports used in NAC 800
Port
Ports used for testing endpoints:
88 (TCP)
89 (TCP)
53 (TCP)
53 (UDP)
3128 (TCP)
137 (UDP)
138 (UDP)
139 (TCP)
445 (TCP)
1500 (TCP)
1500 (TCP)
Table E-1.
Ports in NAC 800
The following table provides information about Ports used in NAC 800:
Parties
Description
Endpoint to ES
When using agent-based testing, the
endpoint must point (using a browser
window) to destination port 88 on the
ES for testing, which is redirected to
destination port 89 (end-user access
screens) on the ES.
Endpoint to ES
Domain Name Server (DNS). When
an endpoint is quarantined in DHCP
mode, it uses the ES for its name
server.
Endpoint to ES
Any endpoint configured to use an
autoproxy (DHCP endpoint
enforcement mode only), and when
using agent-based testing and static
routes, the destination port is
(squid) on the ES.
ES to endpoint
These ports are opened by default
when File and Print Sharing is
enabled, but are not used by NAC 800.
ES to endpoint
This port is first used for NMB lookup
(identify yourself) on Windows
endpoints. If this port is not open, the
endpoint cannot be tested.
Then, this port is used for testing
endpoints with the Agentless method.
NOTE: This port is opened by default
when File and Print Sharing is
enabled.
ES to endpoint
Ports used for testing endpoints with
the Agent-based method.
ES to endpoint
Ports used for testing endpoints with
the ActiveX method.
Comments
Not configurable
Not configurable
Not configurable
3128
Configure on the firewall/router
between ES and endpoint
Configure on the firewall/router
between ES and endpoint
Configure on the firewall/router
between ES and endpoint
Configure on the firewall/router
between ES and endpoint
E
E-1
Advertisement
Chapters
Table of Contents
