Dynamic Host Configuration Protocol (Dhcp) Server - Panasonic KX-NS1000 User Manual

Hide thumbs Also See for KX-NS1000:

Table of Contents

5.5.6 Dynamic Host Configuration Protocol (DHCP) Server

The PBX has a built-in DHCP server. When the DHCP server is enabled, the PBX will automatically assign IP

addresses to other devices on the network, such as IP-PTs.

Using a DHCP server simplifies network management by removing the need to assign IP addresses to devices

The DHCP Server feature cannot be used if the PBX's IP address assignment mode is set to DHCP.

If the PBX's DHCP server is enabled, make sure that no other DHCP servers are running on the same

network. Having more than one DHCP server on a network can result in network errors.

For the following settings, the PBX delivers the settings of its LAN port to devices: subnet mask, default

gateway address, and DNS server addresses. As NTP server information for KX-UT extensions, the PBX

delivers either its own IP address or that of an external NTP server.

PC Programming Manual References

27.2.1 Network Service—[2-1] Server Feature—DHCP

5.5.6 Dynamic Host Configuration Protocol (DHCP) Server

Feature Guide