Panasonic KX-NCP500 Programming Manual page 325
Pure ip-pbx
Hide thumbs
Also See for KX-NCP500:
- Programming manual (1016 pages) ,
- Pc programming manual (892 pages) ,
- Features manual (504 pages)
Table of Contents
Advertisement
Gateway Address [Common Settings]
Displays the default gateway address of the network for IP-PTs (reference only).
To change the value displayed here, click Common Setting, and set the desired value for
Address.
Default
0.0.0.0
Value Range
0.0.0.0–223.255.255.255
Maintenance Console Location
3.41 [1-1] Slot—Card Property - IP Extension (KX-TDE series only)
Programming Manual References
3.42 [1-1] Slot—Card Property - IP Extension—Common Settings (KX-TDE series only)
Feature Manual References
9.1.15 IP-PT (IP Proprietary Telephone)
Keep Alive Time Out
Specifies the length of time that the PBX will continue to consider an IP-PT to be active even if it receives no
transmissions from that IP-PT. The PBX constantly confirms the status of IP-PTs. If no communications are
received from an IP-PT for the duration specified here, the PBX considers the IP-PT to be unreachable, and
sets the port status to Fault.
During operation, set between 10 s and 60 s. Settings over 60 s, and Disable, are used for debugging purposes,
and IP-PTs cannot be guaranteed to function normally in these circumstances. Do not use debugging settings
unless instructed to do so.
Default
20 s
Value Range
Disable, 10–120 s
Maintenance Console Location
3.41 [1-1] Slot—Card Property - IP Extension (KX-TDE series only)
Programming Manual References
None
Feature Manual References
9.1.15 IP-PT (IP Proprietary Telephone)
Document Version 2011-10
3.41 [1-1] Slot—Card Property - IP Extension (KX-TDE series only)
Gateway
PC Programming Manual
325
Hide quick links:
Advertisement
Table of Contents
