MB991618
Plain
washer
FRONT AXLE -
On-vehicle Service
ON-VEHICLE SERVICE
WHEEL BEARING AXIAL PLAY CHECK
1. Remove the disc brake caliper and suspend it with a
wire.
2. Remove the brake disc from the front hub.
3. Attach a dial gauge as shown in the illustration, and then
measure the axial play while moving the hub in the axial
direction.
Limit: 0.06 mm
4. If axial play exceeds the limit, replace the front hub
assembly.
HUB BOLT REPLACEMENT
1. Remove the caliper assembly and secure it with wire
MB990767
so that it does not fall.
2. Remove the brake disc.
3. Use the special tools to remove the hub bolts.
4. Install the plain washer to the new hub bolt, and install
the bolt with a nut.
MB990767
26-5