22B-46
MANUAL TRANSMISSION OVERHAUL -
TRANSMISSION CASE
DISASSEMBLY AND REASSEMBLY
3*
Disassembly steps
"CA 1. Oil seal
"BA 2. Needle bearing*
NOTE
*: Refer to the installation procedures only when replacing the transmission case.
Air
Bush
bleeding
hole
2*
4
"AA 3. Bush*
REASSEMBLY SERVICE POINTS
"AA BUSH INSTALLATION
Press in the bush to the position shown in the illustration
so that the split face of the bush does not cover the air bleeding
groove on the case.
Transmission Case
1
4. Transmission case