Table of Contents
Advertisement
Removing the ignitor: (Gas dryers)
1. Disconnect the dryer from electrical supply and
remove the burner.
2. Using a screwdriver, release the spring clip holding
the ignitor to the burner.
Removing the gas valve assembly: (Gas dryers)
1. Turn the gas supply off and disconnect the dryer
from electrical supply
2. Unplug the wires from the valves
3. Using a 15/16” open end wrench, disconnect
the manifold pipe from the valve.
4. Remove the one screw securing the gas valve
assembly bracket to the base, slide the gas valve
assembly forward and lift the gas valve assembly
out.
5. Remove the three screws holding the valve to the
bracket.
Removing the gas valve coils: (Gas dryers)
1. Disconnect the dryer from electrical supply and
remove the front panel.
2. Disconnect the wires from the coils, remove the
two screws holding the coil bracket to the valve
base and lift the coils off.
77
Hide quick links:
Advertisement
Table of Contents
