User manual 1 Safety Precautions This appliance can be used in public areas. Remove all objects from pockets such as lighters and matches. WARNING. This appliance is intended only for drying textiles washed in water. DO NOT MODIFY THIS APPLIANCE. Servicing shall be carried out only by authorized personnel.
Warranty will be applicable where the customer has used only genuine spare parts and has performed maintenance in accordance with Electrolux Professional user and maintenance documentation made available in paper or elec- tronic format. Electrolux Professional strongly recommends using Electrolux Professional approved cleaning, rinse and descaling agents to obtain optimal results and maintain product efficiency over time.
User manual 4 Air flow The figure shows the air flow in the drying cabinet. Air is blown in on the left and right sides as well as through the hangers. fig.W01216 Air flow in the cabinet Air flow in the hangers...
User manual 5 Operation 5.1 Operation Pull the hangers out of the drying cabinet to hang the garments. Each hanger can hold a complete set of work clothes. Place the loops of the pants over the hanger and then hang the jacket. Place the hanger in one of the four support rails.
User manual 5.2 Program description Drying at a high temperature for impregnation Drying at a low temperature The drying programs are divided into two sequences, as indicated by the lamp (B): 1. Drying: The lamp (B) remains lit. 2. Cool-down period: The lamp (B) flashes. fig.W01221 5.3 Overheat protection The drying cabinet is equipped with an overheat protection function that is reset automatically.
User manual 5.4 Filters The drying cabinet has four filters located in the cabinet ceiling – two at the front edge and two at the rear edge. Note! The drying cabinet must not be used if any of the filters are removed. Note! The user is responsible for checking and cleaning the filters after each drying program.
User manual 6 Maintenance It is the responsibility of the owner of the appliance/the laundry manager to make sure that maintenance is performed regularly. Note! Lack of maintenance may deteriorate the performance of the appliance and may cause damage to components.
User manual 7 Servicing Before contacting the service department, you should find out the name, article number and serial number of the drying cabinet. This information can be found on the identification plate (A) located inside the cabinet. fig.W01224...
User manual 8 Disposal information 8.1 Disposal of appliance at end of life Before disposing of the machine, make sure to carefully check its physical condition, and in particular any parts of the structure that can give or break during scrapping. The machine’s parts must be disposed of in a differentiated way, according to their different characteristics (e.g.
Page 16
Electrolux Professional AB 341 80 Ljungby, Sweden www.electroluxprofessional.com...