Toshiba Strata CTX Programming Manual page 308
Digital business telephone systems
Hide thumbs
Also See for Strata CTX:
- User manual (139 pages) ,
- Manual (60 pages) ,
- Installation manual (24 pages)
Table of Contents
Advertisement
Telephone Button Programming
200 Series Programs
Programs 200~202
Button
Sequence
200-41
Activate Message
Waiting
, n,
,
A7#
C‚yq
201
Station Delete
,
!
C‚yq
201-01
Primary DN
, n,
,
A7
C‚yq
202
ISDN BRI Station
,
!!
C‚yq
202-00
Primary DN
n,
.
C‚yq
202-01
Equipment
, xxyyzz,
A7
C‚yq
202-02
ISDN Channel Group
, n,
A7!
C‚yq
202-03
ISDN Protocol
, n,
A7"
C‚yq
202-04
Type Connection
, n,
A7#
C‚yq
202-05
BRI Station COS
•
Day1 COS
•
Day2 COS
•
Night COS
, n,
, n,
A7$
Tƒx…
, n,
Tƒx…
C‚yq
13-30
(continued)
Value(s)
n =
1. Enable
2. Disable
C‚yq
C‚yq
n =
Up to 5 digits
xx =
Cabinet 1 (CTX100),
01~02 (CTX670 Basic),
01~07 (CTX670 Exp.)
yy =
Slot 01~8 (CTX100),
01~10 (CTX670)
zz =
Circuit (01~04)
n =
1~32 (CTX100)
1~48 (CTX670 Basic)
1~128 (CTX670 Exp.)
n =
1. National ISDN
2. ETSI
3. TTC
4. National ISDN - Nortel
n =
1. Point to Point
2. Point to Multi Point
n =
1~32
This feature is available only with CTX Release 1.3 or higher software
and with CTX WinAdmin Release 1.3 or higher software.
Enable: This station is allowed to activate station-to-station message
waiting on other stations by dialing the other station number plus 7, 8
or 9; or, by pressing the Msg key. This feature is available with Strata
CTX R1.3 software.
Disable: This station cannot activate station-to-station message
waiting on other stations by dialing the station number plus 7, 8 or 9.
Notes
•
When disabled, digital telephones are still allowed to activate
station-to-station message waiting by pressing the Msg button.
•
This parameter does not apply to Voice Mail ports to use the
special Message Waiting access codes.
This command deletes stations.
PDN or PhDN to be deleted.
This command assigns ISDN BRI Stations.
ISDN BRI circuit Prime Directory Number.
Enter the BRI equipment number assigned to this PDN. This is the
cabinet, slot, and circuit number of the RBUU/RBUS or RBSU/RBSS
interface PCB to which the the PDN is, or should be, assigned. Enter
data as xxyyzz:
Example: If the PDN should be a assigned to a BDKU in cabinet 5,
slot 2, circuit 3; enter 050203.
Cabinet numbers:
•
CTX100: Select 01 for Base and Expansion cabinet.
•
CTX670: Select 01 for Base and 02~07 respectively for each
Expansion cabinet.
Slot numbers:
•
CTX100: Select 01~04 for Base slots and 05~08 for Expansion
slots.
•
CTX670: Select 01~08 for Base slots and 01~10 for Expansion
slots.
Channel Group Number.
Protocol
Connection format
COS for Day1
COS for Day2
COS for Night
Strata CTX Programming - Part 3:Telephone Button Programming 04/03
Summary
- Quick Links:
- Step 1: Install Ctx Winadmin Software
Hide quick links:
Advertisement
Chapters
Table of Contents
