Table of Contents
Advertisement
D-Link DNS-346 USER'S MANUAL
System Alert Type.
Admin Password Change:
An alert will be sent if the admin password is changed.
Firmware Has Been Upgraded:
An alert will be sent if the firmware is upgraded.
Network Setting Changed:
An alert will be sent if the network settings of the DNS-346 are
changed.
System Temp. Exceeded:
An alert will be sent if the DNS-346 device exceeds the set
threshold. After the alert has been sent, the DNS-346 will power
off for safety.
Send S.M.A.R.T. Test Result:
A test result will be sent if the DNS-346 performs S.M.A.R.T. test.
The test can be performed in Maintenance -> Disk Diagnostic.
RAID Operations Type
Disk Inserted:
An alert will be sent if a new disk is inserted into the DNS-346.
Disk Removed:
An alert will be sent if a disk is removed from the DNS-346.
RAID Created:
An alert will be sent if a new RAID array is created on the DNS-
346.
RAID Removed:
An alert will be sent if a RAID configuration is removed from the
DNS-346.
RAID Configured/Rebuilt:
An alert will be sent if the user configures an existing RAID array
on the DNS-346.
RAID Extended:
An alert will be sent if the user extends the size of an existing
RAID array on the DNS-346.
Page 58 of 85
- Quick Links:
- Software Setup
- Disk Management Page
- Iscsi Page
Hide quick links:
Advertisement
Table of Contents
