Table of Contents
Advertisement
Symptoms
Sound may change during the drying operation as the speed of
rotations of the blower fan is adjusted.
Sound during the
drying operation
Sound of a drum rotating at high speed during the drying operation.
Is the machine body shaky or placed on an inclined floor?
Are there any foreign objects such as hairpin and coins in the
tumbling drum?
Are the bolts for transporting still mounted as it is?
Vibration and noise is
troublesome
Since the front loading type washing machine rotates more in
a lateral direction as compared to conventional washers and
dryers, vibrations are more easily transmitted to the floor.
The number of rotations of drum increases gradually in spinning and
may become large in the middle.
When the machine is installed on the mounting tray, vibrations
may intensify when the wash load is inclined in one direction.
Sound from the drain outlet
Sound of the air charged with moisture discharging during the
during drying operation.
drying operation.
The frame vibration
During drying, the vibration may become intensified when the
becomes intensified in
blower rotation speed is changed.
operation
Sound of water
At the end of the drying operation, water is fed for storing the
flowing at the end of
water in the drain trap. (Backward flow of odor from the drain
the drying operation
hose is prevented by storing the water in the drain trap)
Is the tapcock turned on? Or has the water supply been cut
off?
Has the dirt accumulated in the filter of the water supply inlet?
Water can't be fed
Are the water supply pipe and the water supply hose frozen?
If you start from rinsing, perform water draining and spinning
before water feeding.
Does the tapcock have the correct shape?
Are the joint and the connection nut loose?
There is water
leakage at the water
supply hose
Is the water leaking from the water tap?
If packing or metal parts of the water tap are used for a long
time, water leakage may occur due to aging degradation or rust.
Please check the following items
Adjustment method
It is not an error.
Set to low speed mode for the adjustment of the number of spinning
rotations during Washing-Drying operation (drying process).
Check that the air bubble of the level (provided separately) is in the
circle.
(Installation Manual)
Clean off the foreign objects.
Remove the bolts for transporting.
(Installation Manual)
It is not an error.
Set to low vibration mode during the adjustment of spinning
operation.
It is not an error.
Use the Reinforcing Board sold separately when the foundation is
not strong (vibrations become troublesome).
It is not an error.
It is not an error.
It is not an error.
Check that the water tap is open.
Remove the accumulated dirt.
Check the water hose and water supply pipes.
It is not an error.
Check the water tap.
(Installation Manual)
Check the water hose and water supply pipes.
It is not an error.
(Installation Manual)
83
Hide quick links:
Advertisement
Table of Contents
