Table of Contents
Advertisement
In case of when abnormal situations happen
In the following cases‚ the indicator will blink or the buzzer will sound. In order to prevent accident wrong detection.
Press PAUSE or turn off the power and turn it on again.
In case the same error indication appears‚ perform the following detection.
About automatic power off
Power supply will automatically turn off if machine is left as it is for 10 minutes without pressing the Start button after turning on the power.
Pause condition or the door is open for more than 1 hour.
After the operation finishes.
Power supply will automatically turn off if the machine is left as it is for more than 12 hours after the notification display appears.
Water can't be fed
Water can't be drained
Spinning fails
When the time left indicator shows the following
Is the tapcock turned on?
Press
to
Is there any rubbish in the screen at the water supply inlet?
pause.
Is it the water failure?
Is the water supply piping or the water feeding piping frozen?
Is the lint accumulated in the drain hose, drain outlet or drain trap?
Is the drain hose set correctly?
Is the pipe broken or frozen?
Press
to
Is the drain hose laid down?
pause.
Is the hose end immersed in water?
Is the middle portion raised by 10 cm or more?
Is the total length of drain hose more than 3 m when using
extension hose?
Does the laundry deflect?
Are you only washing harder clothes such as towel or jeans,
or washing load put in the washing net?
Press
to
There is a lot of larger laundry (sheet, etc.)
pause.
Is the machine body shaking or placed on an inclined floor?
Are you operating the machine with washing load that not be
washed or dried?
In case of any display other than the following
Check the following items
(Installation Manual)
Spread out the laundry as much as possible when placing it in.
Even seemingly uniform‚ the cotton laundry containing water
becomes heavier and gather at one side inclining.
Add 2, 3 pieces of other washing load. (Laundry may
become imbalanced if only one piece is washed)
Reduce the larger laundry.
Check the bubble in the circle.
(Installation Manual)
Remove the laundry that can not be washed or dried.
(Vibrations may intensify during spinning)
Press
to
start the operation
Press
to
start the operation
After checking
(P.18-21)
Press
to
start the operation
(P.16)
79
Hide quick links:
Advertisement
Table of Contents
