Output Signal Types And Formats; Using Genlock - Sony PMW-10MD Operating Instructions Manual
Hd video camera
Hide thumbs
Also See for PMW-10MD:
- Brochure (2 pages) ,
- Specification sheet (2 pages) ,
- Instructions before use (163 pages)
Table of Contents
Advertisement
Output signal types and formats
The output signal format depends on the
recording signal format. The following table lists
Recording signal format
NTSC
HQ 1080/60i
SP 1080/60i
PAL
HQ 1080/50i
SP 1080/50i
a) Interlaced (i) or progressive (P) output signals can be
selected with "DVI Out Select" (see page 65) in the
VIDEO SET menu.
Using genlock
Synchronization (genlock) is required if you want
to shoot with two or more PMW-10MD units, or
combine this unit with other equipment.
To synchronize, input a sync signal to the EXT
SYNC connector. The usable sync signal formats
depend on the setting of "Country" (see page 67)
in the OTHERS menu.
When Country is set to NTSC Area: 1080/
59.94i or 480/59.94i
When Country is set to PAL Area: 1080/50i or
575/50i
Notes
• It is not possible to establish genlock during
recording of clips or still images pictures It is
also not possible to establish genlock of one
signal and then to input another sync signal and
establish genlock of that signal during
recording.
• It is not possible to establish genlock when the
sync signal is unstable.
• The subcarrier is not synchronized.
HD output signal
Y,P
,P
OUT or HD
B
R
SDI OUT connectors
1080/59.94i
1080/50i
the types and formats of camera output signals
and signals recorded by this unit.
DVI-D OUT
a)
connector
1080/59.94i or 1080/
59.94P
1080/50i or 1080/50P
Recording Signal Format Settings
SD output signal
VIDEO OUT or S-
VIDEO OUT
connector
480/59.94i
575/50i
25
Advertisement
Table of Contents
