Recording Signal Format Settings; Setting The Recording Signal Format - Sony PMW-10MD Operating Instructions Manual
Hd video camera
Hide thumbs
Also See for PMW-10MD:
- Brochure (2 pages) ,
- Specification sheet (2 pages) ,
- Instructions before use (163 pages)
Table of Contents
Advertisement
Recording Signal
Format Settings
The recording signal format is specified by bit
rate (HQ or SP), number of effective lines, frame
rate, and scan system (i).
Recording signal format choices vary with the
"Country" setting of the OTHERS menu.
When "Country" is set to "NTSC Area": HQ
1080/60i or SP 1080/60i
When "Country" is set to "PAL Area": HQ
1080/50i or SP 1080/50i
When the recording bit rate is HQ, the camera
records at a bit rate of 35 Mbps. When the
recording bit rate is SP, the camera records at an
HDV-compatible bit rate of 25 Mbps.
Setting the recording signal
format
Use "Video Format" of the OTHERS menu.
1
Display the OTHERS menu and select
"Video Format."
For details on menu operations, see "Basic
Menu Operations" (page 63).
The format choices are displayed.
Recording signal format choices
2
Turn the SEL/SET knob to select the
format then press the knob.
A message that confirms whether you
execute setting of "Video Format."
3
Turn the SEL/SET knob to select
"Execute" then press the knob. To
cancel setting of "Video Format," select
"Cancel" then press the knob.
24
Recording Signal Format Settings
Note
The Video Format setting cannot be changed
during recording and during freeze display.
Advertisement
Table of Contents
