Least Cost Routing Access; Message Waiting - Toshiba PERCEPTION 4000 User Manual
Proprietary digital telephone
Hide thumbs
Also See for PERCEPTION 4000:
- User manual (92 pages) ,
- Quick reference manual (17 pages) ,
- Quick reference manual (8 pages)
Table of Contents
Advertisement
PERCEPTION 4000
To Access Least Cost Routing:
1. Enter the Least Cost Routing
(LCR) access code.
2. Dial the destination number.
LEAST COST ROUTING ACCESS
You can access the system's Least Cost Routing feature to route
outgoing calls over the least-costly call facilities. If these trunks are not
available, a warning tone may sound to indicate that higher-priced
facilities are about to be searched.
Dial tone will sound to indicate that LCR has been accessed.
Up to ten digits can be dialed for long distance calls. Up to seven digits
can be dialed for local calls. Your system may also require the entry of
toll prefixes for long distance or international calls.
The system will process the call and attempt to access an outgoing trunk.
If your station is restricted from accessing any available trunks, you will
hear reorder tone.
If the least-costly call facilities are not available, a warning tone may
sound to indicate that higher-priced facilities are being searched. At this
point, you can either hang up and call back when a lower-priced facility is
available, or use an available higher-priced trunk.
NOTES:
1. A warning tone will not occur with emergency calls, calls made via a
hotline, calls made to an off-premises station, or calls that are
forwarded to an off-premises location.
2. In order for calls to be automatically routed over the least-costly call
facilities, your PERCEPTION 4000 system must be properly
programmed.
MESSAGE WAITING
When a dialed destination is busy or does not answer, you can leave a
message at the station through Callback Messaging so that the called party
can return your call. If you have a PERCEPTION 4000 HDT2020SD digital
telephone, you have the additional option of leaving one of eight predefined
text messages, so that a receiving HDT2020SD telephone can receive an
informative text message (e.g., RETURNED YOUR CALL, PLEASE CALL)
along with other identifying message information. If your PERCEPTION
4000 system has a connected voice mail system, you can leave a message
for a station user by calling, or being routed to, the station's voice mailbox.
FEATURE OPERATION
4-41
Advertisement
Table of Contents
