Command Line Interface; Accessing The Command Line Manager (Clm) - Nokia A032 User Manual
Wireless lan access point
Hide thumbs
Also See for A032:
- Safety information manual (76 pages) ,
- Manual (46 pages) ,
- Getting started manual (45 pages)
Table of Contents
Advertisement
2. Command line interface
Accessing the command line manager (CLM)
Throughout this
chapter, the command
line manager is
referred to as the CLM
for brevity.
Important!! You need
a null-modem cable if
you want to
communicate via the
serial port.
Command line interface
The command line manager (CLM) gives you
complete control over the Nokia A032 via a
text-based interface.
This chapter
•
explains how to access the CLM
•
explains how to configure the Nokia A032
using the
set
•
lists all the commands available from the
CLM.
The Web browser-based interface described in
the previous chapter is the normal method by
which you customize your Nokia A032.
However, there are times when the methods
described in this chapter are more appropriate.
In particular, the CLM is the only method
supported via the serial port.
Your Nokia A032 has a command line
interface, which you can access in one of two
ways:
•
Using a PC terminal attached to the serial
port via a null-modem cable
•
Using a Telnet session on a wired or
wireless LAN attached station.
command
67
Advertisement
Table of Contents
Troubleshooting
