Nokia A032 User Manual page 37
Wireless lan access point
Hide thumbs
Also See for A032:
- Safety information manual (76 pages) ,
- Manual (46 pages) ,
- Getting started manual (45 pages)
Table of Contents
Advertisement
Field
AP MAC Address
RADIO MAC Address
Regulatory Domain
Using the Web manager
The MAC address of the access point. This is the address
used by all management accesses to the unit.
The MAC address of the radio card. This is used for
IEEE802.11 transmissions and is permanently stored in
the radio card.
The regulatory domain is set in the configuration section
(see Basic Access Point setup on page 35) according to
the country in which the access point is operating. The
Access Point will not attempt to set frequency channels
outside the allowed range of the regulatory domain.
Three bar graphs are shown at the bottom of
the screen. These provide information about the
state of the system and radio:
•
Buffer Loading – The A032 depends on
memory buffers to store data passing
through the unit. This graph shows how
many of the buffers are used. If the graph
approaches 100% you might see some
reduction in throughput or lost packets.
Under normal circumstances the buffer
utilization should be under 60%
•
System Loading – Utilization of the
processor in the A032. Normally this will be
less that 50%
•
Radio Usage – Utilization of the radio link.
The first bar indicates a value between 0 and
10%. The second bar 10% – 20% and so on. The
graph is refreshed every 10 seconds.
Meaning
31
Advertisement
Table of Contents
Troubleshooting
