Preparing the scanner for transportation
1. Make sure the transportation lock lever is in the UNLOCK
position.
2. Align the SCSI ID rotary switch with " ".
3. Turn on the scanner.
4. After the carriage moves to the back of the scanner, slide the
transportation lock lever to the LOCK position.
Preparing the optional Transparency Unit for transportation
1. With the Transparency Unit attached, turn on the scanner and
wait until the unit's lamp assembly moves to its home
position. Then turn off the scanner and remove the
Transparency Unit.
2. Raise the front of the Transparency Unit, hold it upright, and
gently shake it up and down once so that the lamp assembly
slides down toward the back of the unit. Wait until the lamp
assembly comes to rest.
3. Install the shipping screw in its original shipping hole.
Maintenance and Troubleshooting
5-3