Table 123
Protocol VLAN Configuration Menu options
Command
prio <0-7>
add
rem
ports
tagpvl enable|disable
taglist
ena
dis
del
cur
Private VLAN configuration
Command: /cfg/l2/vlan x/privlan
[privlan Menu]
The following table describes the Private VLAN Configuration Menu options.
Table 124
Private VLAN Configuration Menu options
Command
type primary|isolated|community Defines the VLAN type, as follows:
map <2-4094>
ena
Description
Configures the priority value for this PVLAN.
Adds a port to the selected PVLAN.
Removes a port from the selected PVLAN.
Defines a list of ports that belong to the selected protocol on this VLAN.
Enter 0 (zero) to remove all ports.
Enables or disables port tagging on this PVLAN.
Defines a list of ports that will be tagged by the selected protocol on this
VLAN. Enter empty to disable tagging on all ports by this PVLAN.
Enables the selected protocol on the VLAN.
Disables the selected protocol on the VLAN.
Deletes the selected protocol configuration from the VLAN.
Displays the current configuration for this Protocol VLAN.
type
- Set Private-VLAN type
map
- Associate secondary VLAN with a primary VLAN
ena
- Enable Private-VLAN
dis
- Disable Private-VLAN
cur
- Display current Private-VLAN configuration
Description
•
Primary: A Private VLAN must have only one primary VLAN.
The primary VLAN carries unidirectional traffic to ports on the
isolated VLAN or to community VLAN.
•
Isolated: The isolated VLAN carries unidirectional traffic from
host ports. A Private VLAN may have only one isolated VLAN.
•
Community: Community VLANs carry upstream traffic from
host ports. A Private VLAN may have multiple community
VLANs.
Configures Private VLAN mapping between a secondary VLAN
(isolated or community) and a primary VLAN. Enter the
primary VLAN ID.
Enables the Private VLAN.
Configuration Menu 154