Table of Contents
Advertisement
Configuration Menu
Introduction
The Configuration Menu is only available from an administrator login. It includes submenus for
configuring every aspect of the switch. Changes to configuration are not active until explicitly applied.
Changes can be saved to non-volatile memory (NVRAM).
Menu information
Command: /cfg
[Configuration Menu]
The following table describes the Configuration Menu options.
Table 78
Configuration Menu options
Command
sys
port <port number>
l2
l3
qos
acl
rmon
pmirr
ufd
sfd
dump
sys
- System-wide Parameter Menu
port
- Port Menu
l2
- Layer 2 Menu
l3
- Layer 3 Menu
qos
- QOS Menu
acl
- Access Control List Menu
rmon
- RMON Menu
pmirr
- Port Mirroring Menu
ufd
- Uplink Failure Detection Menu
sfd
- Server Link Failure Detection Menu
dump
- Dump current configuration to script file
ptcfg
- Backup current configuration to FTP/TFTP server
gtcfg
- Restore current configuration from FTP/TFTP server
cur
- Display current configuration
Usage
Displays the System Configuration Menu.
Displays the Port Configuration Menu.
Displays the Layer 2 Configuration Menu.
Displays the Layer 3 Configuration Menu.
Displays the Quality of Service Configuration Menu.
Displays the Access Control List Configuration Menu.
Displays the RMON Configuration Menu.
Displays the Mirroring Configuration Menu.
Displays the Uplink Failure Detection Configuration Menu.
Displays the Server Link Failure Detection Configuration
Menu.
Dumps current configuration to a script file.
Configuration Menu 108
Advertisement
Table of Contents
