Chapter 6 Information Settings and Display
6.4 Utility > show pinned-data
show pinned-data
If certain failure events have occurred when writing data, data cannot be written back to the disk(s)
(volumes) from the cache data area. The data that cannot be written back to the disk is retained in the cache
data area and is called pinned data (PIN).This command displays a list of all the pinned data.
■
Syntax
show pinned-data
■
Parameter
No parameters.
■
Output
Volume
LBA
RC
SK
ASC
ASCQ
■
Example(s)
The following example displays a list of all the pinned data:
CLI> show pinned-data
Volume
No.
Name
----- -------------------------------- ------------------ ---- ---- ---- ----
1 VolumeNumber0001
1 VolumeNumber0001
3 Vol3
4 Vol4
4 Vol4
11 Vol11
Volume identifiers
No.
Volume number
Name
Volume name
Logical block address (LBA of volume in which pinned data is retained)
Cause of pinned data (Reason Code)
Sense key
Additional sense code
Additional sense code qualifier
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
LBA
RC
0x0000000000000000 0x00 0x00 0x00 0x00
0x0000000000000100 0x00 0x00 0x00 0x00
0x0000000000000000 0x00 0x00 0x00 0x00
0x0000000000000000 0x00 0x00 0x00 0x00
0x0000000000001000 0x00 0x00 0x00 0x00
0x0000000000000000 0x00 0x00 0x00 0x00
727
SK
ASC
ASCQ
P2X0-1210-05ENZ0